Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2015 11:27:11 GMT -5
Are there any diagrams available, or pictures as to the correct linkages attached to the carb.
I also need for the accelerator arm on the engine block.
|
|
|
|
Post by Scoutpilot on Jan 19, 2015 17:50:26 GMT -5
Ask, and ye shall receive.You would need this linkage rod if you had a belt-drive governor.
|
|
|
|
Post by Scoutpilot on Jan 19, 2015 17:55:12 GMT -5
If you want to hook up the manual throttle you will need these two parts, on the left, the throttle cable sheath clamp and the throttle cable lock, on the right.And this is how it looks connected.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2015 19:19:53 GMT -5
That is EXACTLY what I am looking for.
Thank You. I made a hand drawn diagram when I disassembled, and took what I thought were good photos at the time.
Is there any special lube to use on any of the wear areas?
|
|
|
|
Post by Scoutpilot on Jan 19, 2015 19:48:52 GMT -5
Graphite would be all I would use.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2015 22:37:13 GMT -5
The two parts for hooking up the manual throttle, do you have them for sale here?
|
|
|
|
Post by Scoutpilot on Jan 20, 2015 6:21:25 GMT -5
I don't have any in stock right now, But check with our old friend Carl.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2015 9:02:32 GMT -5
I am getting ready to install my carb linkage.
i looked back at the photos you posted, and I think I am missing some parts.
When I disassembled, I tagged and bagged these parts. 
|
|
|
|
Post by Scoutpilot on Mar 22, 2015 10:15:25 GMT -5
This is how it all goes together. You appear to be missing the spring tab that installs between the rod set nut and the rod attach block.
|
|
|
|
Post by Scoutpilot on Mar 22, 2015 10:19:14 GMT -5
You can easily make one out of a small rectangle of sheet metal.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2015 10:40:25 GMT -5
In the second pic. I think that square next to the bellcrank is the broken piece?
What would the length of the tounge be?
I'll make one up.
Let's start there.
|
|
|
|
Post by Scoutpilot on Mar 22, 2015 13:11:58 GMT -5
Measurement is nominal. Two views. You also need a correct throttle return spring.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2015 15:16:34 GMT -5
Scout
Is the one in the picture for sale?
How about a correct spring?
Let me know.
Thanks
|
|
|
|
Post by Scoutpilot on Mar 22, 2015 15:31:39 GMT -5
Invoice sent for throttle return spring, manifold attaching clip and lever attaching clip. Got it yet?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 22, 2015 19:35:37 GMT -5
Got and paid happily.
Thanks for the fast response and personal service.
If you don't mind, perhaps we could use this thread to go through the whole assembly?
I will do pics as I go with your coaching.
What say you?
|
|
