|
Post by Scoutpilot on Aug 7, 2015 10:59:03 GMT -5
To properly set the metering rod in your YF you'll need this tool. I've included measurements so anyone enterprising enough can make their own. The width of the steel bar should be 1/2 inch.
|
|
|
Post by schimms on Sept 10, 2015 21:50:07 GMT -5
cool thanks, i may whip one up this weekend, i have a lot of stuff to get done in the lab we will see if there is time.
|
|
|
Post by Scoutpilot on Sept 11, 2015 3:56:01 GMT -5
Good deal!
|
|