|
Post by rickg on Aug 5, 2018 12:30:16 GMT -5
Pulled and flushed the OD Mule's fuel tank. installed new ss mesh in-tank filter and blew out the lines. Rigged up 1st fuel press gage and it read 5.5 psi @ idle, .5psi on the hi side, swapped #1 gage out for another and got just under 5psi I think I like gage #2 better. Trying to draw air thru the old fibre filter was not easy in sure it was restricted. Time to button up that project.. Life is good..
Attachments:
|
|
|
Post by rickg on Aug 5, 2018 12:35:24 GMT -5
Now to troubleshoot the brake lites.. Have 24V to the stock type switch and the switch tests good with the VM.. loose wire? Hope its simple as that..
|
|
|
Post by m38mike on Aug 6, 2018 7:07:44 GMT -5
Clean the bulbs and bulb sockets. 90% of the time that's where my light problems seem to come from.
|
|