|
Post by nobodyjeff on May 1, 2017 16:00:02 GMT -5
I think my screw has been replaced at some time. Its so long i can only adjust it with a stubby screwdriver. What is the proper size supposed to be?
|
|
|
Post by nobodyjeff on May 1, 2017 16:08:20 GMT -5
Guess i could shorten it just would like to know proper length. Tread size too,if i muck it up🤔
|
|
|
Post by Scoutpilot on May 1, 2017 16:55:32 GMT -5
Does it have a slotted hex-head? If so, that is correct. They came in two lengths, one-inch and 1 1/4 inches. IRRC it should be a 10-24.
|
|
|
Post by nobodyjeff on May 1, 2017 18:03:27 GMT -5
Mine is a slotted round head about 2"plus so i will replace it.
|
|
|
Post by Scoutpilot on May 1, 2017 18:36:15 GMT -5
Just be advised, these screws are no longer made. I used to have a bunch of spares, but screws like yours turned up often enough that I am now out of them.
|
|
|
Post by nobodyjeff on May 1, 2017 19:22:35 GMT -5
Im sure i can find a serviceable replacement. And if necessary i can just shorten this one. Thanks for the info and help
|
|