|
Post by mattymajors on Aug 15, 2017 22:16:36 GMT -5
The front bolt is not impossible. 1. Remove the rear first with 1/2 wrench. 2. Clock the pump slightly to the right (clockwise) for clearance. 3. In spirt of the "Wonder Twins" say it with me: "HAND TOOLS UNITE!!!" I used 3/8 ratchet + 3/8 to 1/4 adapter + 3" 1/4 extension + 1/4 swivel + 1/2 drive 1/2 socket
It will slide just under the pump, over the motor mount bolt and voila.
|
|
|
Post by mattymajors on Aug 15, 2017 22:20:01 GMT -5
The tool Where it goes Up on the bolt
|
|
|
Post by mattymajors on Aug 15, 2017 22:20:50 GMT -5
The front bolt is not impossible. 1. Remove the rear first with 1/2 wrench. 2. Clock the pump slightly to the right (clockwise) for clearance. 3. In spirt of the "Wonder Twins" say it with me: "HAND TOOLS UNITE!!!" I used 3/8 ratchet + 3/8 to 1/4 adapter + 3" 1/4 extension + 1/4 swivel + 1/2 drive 1/2 socket It will slide just under the pump, over the motor mount bolt and voila. 1/4 drive 1/2 socket*
|
|
|
Post by Scoutpilot on Aug 16, 2017 3:25:45 GMT -5
Thank you for your contribution. This particular task has long been at the back of my mind to illustrate. I couldn’t have done it better myself.
|
|