|
Pine Sol
Sept 8, 2016 10:39:53 GMT -5
via mobile
Post by 4x4m38 on Sept 8, 2016 10:39:53 GMT -5
So did the Pine Sol experiment meet with success?
Any luck in scrubbing it in or is soaking the only use?
Thanks!
|
|
|
Post by Scoutpilot on Sept 8, 2016 14:13:08 GMT -5
I’m still working on the ratio of PineSol to Distilled Water. I’m at a 50/50 mix. The soak time needs to be evaluated as well. Stubborn stains may require a scrub pad. But watch for patina loss if scrubbed too much or too hard. I do recommend Nitrile gloves if working in the dip. Fresh water rinse and compressed air blow-out following all.
|
|